McCloskey MAN O' WAR Marine Spar Varnish is a very easy to apply, tung oil based marine spar varnish that provides maximum Ultraviolet (UV) protection.
Man O' War Spar Varnish can be used on indoor or outdoor wood surfaces, and is especially well suited for marine applications such as teak and mahogany on boats, exterior doors, window sills, and outdoor furniture.
Maximum UV Protection
Water and Weather Resistant
Coverage: 1 quart= 75-100 sq. ft.
McCloskey Man O' War Marine Spar Varnish is available in Satin, Semi-Gloss or Gloss:
Read and follow directions and safety precautions printed on container.
Stir before and occasionally during use using care not to create bubbles. Do not Shake!
Test on a hidden section of wood.
Apply a uniform, thin coat using a high quality, clean polyester or natural bristle brush. Do not apply with a roller.
Brush in even strokes in the direction of the wood grain. Use care on vertical surfaces to avoid runs.
Apply at least two thin coats to all surfaces and especially the edges. For maximum protection apply up to four coats.
Between coats allow to dry 24 hours and sand lightly. Remove all sanding dust before applying each additional coat.
Drying Time: Dries to the touch in about 6 hours, wait 24 hours before recoating. Dry times are longer in high humidity or cool temperatures. Apply only when surface and air temperatures are 50-90°F (10-32°C) during application and drying time. Avoid application in direct sunlight or when rain is threatening or late in the day when dew may affect the drying time.
